Month: 2026-04

BRISBANE, AUS, Apr 15, 2026 - (ACN Newswire via SeaPRwire.com) - Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to provide the latest progress update on the Graphene Aluminium-Ion Battery technology ("G+A CELLS") being developed by GMG and the University of Queensland ("UQ") under a Joint Development Agreement with Rio Tinto, one of the world's largest metals and mining groups, and with the support of the Battery Innovation Center of Indiana ("BIC") in the United States of America.The GMG G+A CELLS have now demonstrated superior performance characteristics when compared to a representative market leading ultra-fast charging batteries, the Lithium Titanate Oxide ("LTO") batteries, which can be sold at a premium price of up to US$1200/kWh.1Figure 1 shows the current energy density of G+A CELLS, based on BIC testing, and shows the doubling in performance (26 to 49 Wh/kg) since the previous announcement in December 20252 and in comparison, to a representative market leading fast charging high power LTO batteries.Figure 1: Increase in Energy Density for G+A CELLS since December '25 UpdateTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_figure1.jpgFigure 2 shows the charge and discharge curves for the G+A CELLS when charged in 6 minutes (10C) and 60 minutes (1C). The energy density of the cells for the G+A CELLS when charged in 60 minutes (1C) is now 101 Wh/kg when charging to 100% State of Charge (SOC) which is an increase from 58 Wh/kg from the previous update. This shows the G+A CELLS have a nominal voltage of approximately 3.2 Volts (an increase from 3.0 Volts in the previous update). The G+A CELLS maintained performance over hundreds of cycles at 6-minute fast charging rate (10C).Figure 2: Battery performance curves of G+A CELLS at 60 min and 6min charge (1C & 10C)To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_001full.jpgBob Galyen, GMG Non-Executive Director and former CTO of CATL - the largest battery manufacturer in the world, commented: "With the possibility of charging from empty to full in around six minutes, this chemistry fundamentally changes how designers can think about electric vehicles, consumer electronics, and stationary storage. Instead of planning around long charge stops with large packs, engineers can optimise for rapid energy turnaround, with higher power, and safer, with GMG's battery made from abundant raw materials. Lithium-ion will remain a key part of the energy landscape for years to come, but its limitations in fast charging, temperature tolerance, and critical-mineral supply are increasingly evident. By leveraging aluminium and graphene, the GMG team is demonstrating a pathway to reduce reliance on traditional lithium-based systems and or combinatorial systems with multiple battery technologies while delivering step-change improvements in charge time and power density. This is not an incremental tweak to existing cells - it is a new platform that can open markets and use cases that were previously uneconomic or impractical. The companies that adapt quickest to this shift will lead the next wave of electrification, and GMG intends to be at the centre of that transition with graphene aluminium-ion technology."Standard commercial Lithium Nickel Manganese Cobalt ("LNMC") and Lithium Iron Phosphate ("LFP") battery cells for electric vehicles and stationary storage are NOT designed for continuous 6-minute charging (10C); typical recommended charge rates are ≤1 hour (1C), often 2 hours (0.5C), with only limited fast charge operation. Only specialized high-power cell designs like LTO battery cells can tolerate charge rates of 6 minutes (10C).3GMG has now developed a completely new hybrid electrolyte that is chloride free and non-corrosive, unlike common aluminium battery electrolytes, along with a complex cathode and anode technology that enables very stable fast charging over hundreds of cycles. The substrate for both the cathode and anode in the G+A CELLS is aluminium foil - which provides significant cost and weight savings compared with copper, the substrate material used in most lithium and sodium-ion batteries. GMG's technology does not include the use of lithium or copper. The Company has submitted an additional patent application covering these new developments.GMG believes that it has significantly met the key target specification requirements for use in heavy mobile equipment, as shown in Figure 3, its main targeted use case, including:- Charging in under 6 minutes;- Energy density > 100 Wh/kg after 1 hour of charging; and- Safe (no Lithium).The next battery development steps include the following activities:- Test and show cycle life up to 10,000 cycles- Test and show ambient temperature impacts- Test and show standard safety testing- Test and show no thermal battery management system needed Figure 3: G+A CELLS Battery Use Case - heavy mobile equipmentTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_figure3.jpgCraig Nicol, GMG Managing Director and CEO, commented: "This is a significant step up from where we were at with battery performance in December 2025 and we see the required performance for our targeted use case being largely met - which means we can start to put together the next stages of the battery maturation program - including partnerships and manufacturing plans."GMG management believes that the G+A CELLS can eventually achieve over 160 Wh/kg when charged in 1 hour, and over 80 Wh/kg when charged in 6 minutes with further development of the cathode, anode, electrolyte and component weights.Figure 4 shows the latest G+A CELLS in pouch format:Figure 4: Current Multi-Layer G+A CELLTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_figure4.jpgBattery Technology Readiness LevelThe battery technology readiness level ("BTRL") of the G+A CELLS remains at Level 4, whilst significantly progressed through this level as shown in Figure 5. GMG is currently in the process of completing the optimization of the electrochemical behaviour for the pouch cells via ongoing laboratory experimentation. Through collaboration with BIC, it is anticipated that the battery technology readiness will ultimately progress to BTRL 7 and 8 since the equipment and processes needed to produce the G+A CELLS are the same as those employed to make Lithium-Ion Batteries, though no definitive timeline for achievement can be provided at this time.Figure 5: Battery Technology Readiness Level (BTRL)To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_004full.jpgThe Company is confident it can meet the overall timeline, as seen in Figure 6, of its battery cell roadmap that calls for testing of cells with customers in 2026 and small commercial production with support of various partners, including BIC, in 2027.Figure 6: Battery Cell RoadmapTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_005full.jpgNext Steps Toward Commercialisation & Market ApplicationsJack Perkowski, GMG Non-Executive Chairman and Director, commented: "I am extremely proud that GMG has progressed its battery to this stage - the Company is getting very close to final commercialisation steps. We look forward to providing further updates as GMG progresses the development of its battery technology."The Company continues to see a broad range of potential applications for a completed G+A CELLS - utilising its ultra-high power-density and economic energy density characteristics. Along with Rio Tinto, a range of global companies have confidentially expressed their interest in working with GMG in the following vertical sectors:Figure 7: Market ApplicationsTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_006full.jpgCurrently, GMG believes it will use a plastic battery pack design, similar to Figure 8, to hold the battery pouch cells - reducing the weight, cost and complexity relative to using a metal case. Using a plastic battery pack is possible for two main reasons - GMG believes that its battery will not require a thermal management system or the fireproofing precautions provided by the metal case in a lithium-ion battery. Using plastic will increase the comparative energy density of G+A CELL packs when compared to lithium-ion batteries.Figure 8: Expected Battery Pack for GMG's G+A CELLS Pouch FormatTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_007full.jpgComparison and Market Review: LTO Batteries As shown in Figure 9 below, the performance of GMG's G+A CELL technology is already very similar to representative LTO batteries.Figure 9: Comparison of GMG's G+A CELLS to Lithium Titanate Oxide (LTO) BatteryTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/292641_figure9.jpg LTO batteries are sold at a premium to LFP and LNMC batteries, which are the main chemistries used in electric vehicles and energy storage systems, and are also widely used in other electronic applications due to their high performance and long cycle life. The material and manufacturing costs for G+A CELLS are expected to be similar to, or less than, the cost to manufacture standard lithium-ion batteries, but substantially lower than the costs to produce LTO batteries.LTO batteries have energy density ranging from 50 - 80 Wh/kg.6 The LTO product is sold globally for use in many applications — with a total of US$5.67 billion sales per annum in 2025. Sales of LTO batteries are expected to grow at 16.9% per annum to an estimated US$ 12.5 billion by 2030. The major manufacturers of LTO batteries include Toshiba, Gree, Microvast and CATL.Further details on applications for the LTO battery from Mordor Intelligence7 are described below. In many of the use cases for LTO batteries, GMG believes that its G+A CELLS can be substituted at a substantially lower cost.Commercial Vehicles: Automotive, primarily buses, refuse trucks, and drayage tractors rather than passenger cars, is the largest user of LTO batteries. Fleets realize five-year total-cost-of-ownership parity once fuel savings and lower maintenance offset higher upfront prices.Fast-charging Electric Buses and Trucks: Transit authorities need battery systems that accept repeated high-power "opportunity charges" during short layovers. LTO cells replenish 80% capacity in roughly five minutes, allowing operators to shrink fleet size without sacrificing route frequency. U.S. Low-No Emission Bus grants earmark more than US$1.5 billion per year, with bid specifications that explicitly reference rapid-charge capability. Parallel subsidy programs in China reimburse up to CNY 80,000 (US$ 11,396) per new-energy bus, accelerating volume deployment in provincial capitals.Hybrid and BEV: Regenerative braking and high-C-rate acceleration favour the use of LTO batteries. Use in fast-charge EV stations is growing rapidly as ride-hailing fleets adopt swap-ready models.Stationary Storage: Utility-scale batteries now cycle multiple times per day for frequency regulation, peak shaving, and voltage support. Energy-storage-system integrators adopt LTO batteries for grid-frequency response where state-of-charge swings are shallow but frequent.Industrial Robotics: LTO batteries are used in continuous-duty forklifts that require partial charges during operator breaks.Aerospace and Defense: Unmanned aerial vehicles, missile auxiliaries, and soldier-worn power banks operating from -40 °C to +60 °C ambient.5-minute Battery-Swap Stations: Battery-as-a-service platforms require ultra-fast turnaround and high cycle life. CATL confirmed plans to install 1,000 swap stations in 2025 and 30,000-40,000 by 2030, each requiring packs that tolerate thousands of rapid exchanges without degradation.Sub-10 kWh Packs: Cordless construction tools, autonomous ground vehicles, and medical carts select LTO batteries to bypass daily pack swaps.12V starter replacement to Lead acid: GMG's G+A CELLS battery technology would be a viable 12 V starter-battery replacement for lead-acid, offering lower weight, longer cycle life, good low-temperature performance and improved cold-cranking capability, together with excellent tolerance to storage at 0% state of charge. In suitable system designs, the chemistry's stable voltage behaviour can also reduce balancing requirements and simplify battery management, helping to lower overall system cost.Lifecycle Procurement Preference: Many government procurement frameworks now weigh lifecycle reliability higher than purchase price. For example, New Mexico awarded a US$ 400 million bus electrification contract that included stringent thermal-runaway resistance metrics. Europe's Clean Industrial Deal allocates capital for storage technologies that stabilize renewables, aligning well with LTO batteries' fast-response profile.Cylindrical Cells: accounted for 37.7% of LTO battery sales in 2024 as entrenched production lines and robust steel casings satisfied heavy-duty demand. Pouch designs address aerospace weight requirements and constrained dashboards in autonomous robots.Summary of Important Milestones for GMG's G+A CELLS Development: MonthImportant Milestones in the Development of the Graphene Aluminium Ion BatteryMay 2020GMG and UQ win Australian Research Council grant for Graphene battery developmenthttps://graphenemg.com/gmg-and-uq-wins-australian-research-council-grant-for-graphene-aluminium-ion-battery-development/Apr 2021The University of Queensland and GMG kick off coin cell battery development projecthttps://graphenemg.com/gmg-the-university-of-queensland-research-uni-quest-kick-off-the-graphene-enhanced-aluminium-ion-battery-development-project/May 2021Graphene aluminium-ion battery performance data - Energy Density and Power Densityhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-performance-data/Jun 2021Graphene aluminium-ion battery performance data - Cycle Lifehttps://graphenemg.com/graphene-aluminium-ion-battery-performance-data/Jun 2021Significant potential battery customer market response to launch of batteryhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-progress-update/Jul 2021Investment decision for coin cell battery development centrehttps://graphenemg.com/gmg-battery-pilot-plant-investment/Oct 2021Construction starts for coin cell battery development centrehttps://graphenemg.com/construction-battery-pilotplant/Oct 2021Bosch Australia Manufacturing Solutions and GMG sign Letter of Intenthttps://graphenemg.com/gmg-and-bosch-sign-collaboration-arrangement-for-bosch-to-design-and-deliver-gmgs-graphene-aluminium-ion-battery-manufacturing-plant/Dec 2021Commencement coin cell battery development centrehttps://graphenemg.com/battery-pilot-plant/Dec 2021Initial coin cell batteries sent for customer feedbackhttps://graphenemg.com/graphene-aluminium-battery-customers-prototypes/Mar 2022Initial factory acceptance testing of semi-automated prototype battery cell assembly equipmenthttps://graphenemg.com/gmg-announces-initial-factory-acceptance-testing-of-semi-automated-prototype-battery-cell-assembly-equipment/Mar 2022Wood Engineering and GMG Sign a Letter of Intenthttps://graphenemg.com/gmg-and-wood-agree-collaboration-arrangement-for-wood-to-engineer-and-deliver-major-graphene-manufacturing-expansion-projects/May 2022Rio Tinto and GMG sign Letter of Intenthttps://graphenemg.com/gmg-riotinto-energysavings-battery/Jun 2022Commissioning of Pouch Cell Equipmenthttps://graphenemg.com/gmg-manufactures-first-pouch-cell/Jun 2022Bob Galyen, former chief technology officer of CATL, joins GMG technical advisory committee.https://graphenemg.com/gmg-technical-advisory-committee-leadership-team-additions-and-cfo-change/Aug 2022Investment decision for Phase 1 modular Graphene Production Planthttps://graphenemg.com/gmg-announces-phase-1-expansion-project-to-graphene-manufacturing-facility-for-energy-saving-products-and-batteries/Oct 2022Significant battery performance, cell and graphene production improvementshttps://graphenemg.com/gmgs-battery-update-significant-battery-performance-cell-and-graphene-production-improvements/Dec 2022Investment of $600k Battery Development Centrehttps://graphenemg.com/gmg-invests-au-600000-to-accelerate-battery-pouch-cell-customer-testing-development-in-2023/Feb 2023Australian Government Approval (AICIS) for production and sale of batteries.https://graphenemg.com/gmg-receives-regulatory-approval-to-enable-significant-commercial-sales/May 2023Battery Joint Development Agreement with Rio Tinto signedhttps://graphenemg.com/gmg-announces-battery-joint-development-agreement-with-rio-tinto/May 2023Battery Technology Readiness Level (BRTL) 2-3 reachedhttps://graphenemg.com/gmg-announces-battery-team-and-related-updates/May 2023Decision to switch to develop Pouch Cells (instead of Coin Cells)https://graphenemg.com/gmg-announces-battery-team-and-related-updates/Jul 2023Bob Galyen former chief technology officer of CATL joins GMG board of Directorshttps://graphenemg.com/graphene-manufacturing-group-appoints-former-chief-technology-officer-of-catl-limited-to-its-board-of-directors/Sep 2023Battery Pouch Cell Prototypes Multilayered Auto-Stacker Demonstrationhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-pouch-cell-prototypes-multilayered-auto-stacker-demonstration/Sep 2023Reaching 500 mAh capacity batteryhttps://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Sep 2023Battery Technology Readiness Level (BRTL) 4 reachedhttps://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Nov 2023Rio Tinto and GMG Partnership Video Launchedhttps://graphenemg.com/rio-tinto-gmg-battery-partnership-video-launch/Dec 2023Commissioning of modular Graphene Production Planthttps://graphenemg.com/graphene-manufacturing-group-commissions-modular-graphene-production-plant/Feb 20241000 mAh Capacity Reachedhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-1000-mah-capacity-reached-and-next-steps-toward-commercialisation/Mar 2024Graphene Manufacturing Group Secures AU$2 million Funding Grant from Queensland Government for Battery Pilot Planthttps://graphenemg.com/graphene-manufacturing-group-secures-au2-million-funding-grant-from-queensland-government-for-battery-pilot-plant/Aug 2024GMG's Graphene Aluminium-Ion Battery: Progress Update and Next Steps Toward Commercialisationhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-progress-update-and-next-steps-toward-commercialisation/Mar 2025GMG's Graphene Aluminium-Ion Battery: Collaboration with World Leading USA Battery Innovation Centre and Next Steps Toward Commercialisationhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-collaboration-with-world-leading-usa-battery-innovation-centre-and-next-steps-toward-commercialisation/Dec 2025GMG Unveils Graphene Aluminium-Ion Battery that Fully Charges in 6 minuteshttps://graphenemg.com/gmg-unveils-graphene-aluminium-ion-battery-that-fully-charges-in-6-minutes/ About BIC:BIC is a collaborative initiative designed to incorporate leadership from renowned universities, government agencies, and commercial enterprises. BIC is a public-private partnership and a not-for-profit organization focusing on the rapid development, testing and commercialization of safe, reliable and lightweight energy storage systems for defense and commercial customers. BIC is a unique organization that has been leading battery cell development for world leading battery companies for over 10 years and has carried out over 500 battery development projects.About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed to improve the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041www.graphenemg.comNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements regarding the pricing of LTO batteries, expectations for GMG G+AI batteries to achieve specification requirements for heavy mobile equipment, the lower cost to produce GMG G+AI batteries, expectations for GMG G+AI batteries in respect of charging time, stability, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system when development is completed, that the new hybrid electrolyte is chloride free and non-corrosive, that the cathode and anode technology employed enables very fast and stable charging, that GMG G+AI batteries provide significant cost and weight savings relative to copper, that G+AI batteries can achieve over 150 Wh/kg charged over 1 hour and 75 Wh/kg when charged over 6 minutes following further development of cathode, anode, electrolyte and component weights, that G+AI batteries will progress to BTRL 7 and 8, that the timeline for the battery cell roadmap is achievable, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and which offers weight, cost and complexity advantages to a metal case and increased energy density, expectations for the lack of a thermal management system or fireproofing precautions, expectations for material and manufacturing costs, expectations for sales of LTO batteries, expectations for G+AI batteries being substitutable for LTO batteries at lower cost, expectations that G+AI batteries are viable 12V starter battery replacements and the rationale therefor and the advantages of pouch design for aerospace weight requirements and constrained dashboards of autonomous robots.Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions that GMG G+AI batteries can be produced at lower cost, as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries, the speed and stability of charging, that G+AI batteries will progress to BTRL 7 and 8, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and offer weight, cost and complexity advantages to a metal case and increased energy density, that the service agreement with the BIC will enable the Company to optimize its cell design and battery manufacturing equipment, and that the Company will be able to meet its overall timeline on the battery cell roadmap. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation: that GMG G+AI batteries cannot be produced at lower cost, or any of the assumptions as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries can not be achieved, G+AI batteries do not offer expected speed and stability of charging, that G+AI batteries will not progress to BTRL 7 and 8, that a range of global companies in a variety of industries will not be interested in working with GMG, that the battery pack design will not be plastic and not offer weight, cost and complexity advantages to a metal case and increased energy density, that the Company will not be able to optimize the electrochemical behaviour of the pouch cell through laboratory experimentation or at all, that the Company will not be able to meet its overall timeline on the battery cell roadmap, that the service agreement with the BIC will not enable the Company to optimize its cell design and battery manufacturing equipment and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 04, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.1 https://www.ritarpower.com/industry_information/The-Price-of-50-kWh-Lithium-Ion-Batteries-A-Comprehensive-Analysis_297.html#:~:text=Lithium%20Titanate%20(LTO)%20Batteries%3A,cost%20between%20%2440%2C000%20and%20%2460%2C000.2 https://graphenemg.com/gmg-unveils-graphene-aluminium-ion-battery-that-fully-charges-in-6-minutes/3 https://findingspress.org/article/21459-impact-of-charging-rates-on-electric-vehicle-batt4 High-power type cells | SCiB™ Rechargeable battery | Toshiba5 https://www.ritarpower.com/industry_information/The-Price-of-50-kWh-Lithium-Ion-Batteries-A-Comprehensive-Analysis_297.html#:~:text=Lithium%20Titanate%20(LTO)%20Batteries%3A,cost%20between%20%2440%2C000%20and%20%2460%2C000.6 https://www.grepow.com/blog/battery-energy-density.html7 Lithium Titanate Oxide Battery Market Size, Share & 2030 Growth Trends ReportTo view the source version of this press release, please visit https://www.newsfilecorp.com/release/292641 Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

TAIPEI, TW, Apr 15, 2026 - (ACN Newswire via SeaPRwire.com) - OBI Pharma, Inc. (TPEx:4174.TWO) today announced its presence at AACR 2026, highlighted by ten poster presentations, showcasing the transformative potential of the GlycOBI® platform. Conventional ADCs often face limitations due to random conjugation, resulting in heterogeneous Drug-to-Antibody Ratios (DAR), suboptimal stability, and narrow therapeutic windows. In contrast, the OBI site-specific glycan-based technology enables a highly homogeneous DAR, translating into improved PK/PD profiles, and reduced off-target toxicity, as demonstrated by OBI's lead programs, OBI-902 and OBI-904.We are further advancing precision oncology through our next-generation bispecific (OBI-201) and bispecific, dual-payload (OBI-221) ADCs. These "biology - driven" molecules are designed to overcome tumor heterogeneity and multi-drug resistance-key challenges in current cancer treatment. By incorporating both the GlycOBI® and GlycOBI DUO® platforms, OBI is developing novel and differentiated therapeutics addressing the unmet medical need for patients with difficult-to-treat solid tumors. Additionally, OBI's robust ADC conjugation platform has proven to consistently deliver product quality and scalability, while enabling expansion into next-generation modalities, including degrader-antibody conjugates (DACs).These data will be presented at the American Association of Cancer Research (AACR) Annual Meeting from April 17 to 22, 2026 in San Diego, CA. (USA)."At OBI, we make better ADCs," said Dr. Ya-Chi Chen, Chief Scientific Officer OBI Pharma. "Our goal is to deliver therapies that not only target tumors more effectively and precisely, but also reduce side effects, giving patients potentially life-changing treatment options."Monday, April 20, 2026 (9:00 AM - 12:00 PM)Title: Overcoming Resistance with OBI-902: Preclinical Evaluation of a Next-Generation TROP2 ADC1Authors: Ren-Yu Hsu, Chi-Huan Lu, Chi-Sheng Shia, Jing-Rong Huang, Hsin-Shan Wu, Lu-Tzu Chen, Jhih-Jie Yang, Tzu-Min Yen, Jyy-Shiuan Tu, Yu-Hsuan Tsao, Ya-Chi Chen. OBI Pharma, Inc, Taipei, TaiwanSession Title: PO. ET07.01 - Quantitative Pharmacology and Translational ModelingLocation: Poster Section 17Poster Board Number: 6Abstract Presentation Number: 1818Title: OBI-904, a Next-Generation Nectin-4-Targeting Exatecan ADC, Demonstrates Enhanced Cytotoxicity and Overcomes Enfortumab Vedotin Resistance2Authors :Yuan-Liang Wang, Chi-Huan Lu, Woan-Eng Chan, Shin-Jin Lin, Ting-Yu Chang, Hong-Syuan Lin, Wei-Jhen Huang, Ya-Chi Chen. OBI Pharma, Inc, Taipei, TaiwanSession Title: PO.ET02.02 - Antibody-Drug Conjugates and Linker Engineering 2Location: Poster Section 13Poster Board Number: 26Abstract Presentation Number: 1729Title: OBI-904, a Glycan-based Site specific Nectin-4-Targeted ADC, Demonstrates Potent and Durable Antitumor Activity with an Improved PK Profile and Overcoming EV-Resistance in Non-Clinical Studies3Authors: Chi-Huan Lu, Ren-Yu Hsu, Jing-Jie Ciou, Tzu Min Yen, Jyy-Shiuan Tu, Yu-Hsuan Tsao, Jing-Rong Huang, Ya-Chi Chen. OBI Pharma, Inc., Taipei, TaiwanSession Title: PO.ET07.01 - Quantitative Pharmacology and Translational ModelingLocation: Poster Section 17Poster Board Number: 7Abstract Presentation Number: 1819Title: The MET/HER3 Antibody-Drug Conjugate with Dual Payload: A Dual-Target Approach to Eliminate Tumor Escape Mechanisms5Authors: Yuan-Liang Wang, Chi-Huan Lu, Woan-Eng Chan, Ting-Yu Chang, Hong-Syuan Lin, Cheng-Yen Wei, Shin-Jin Lin, Lu-Tzu Lu, Meng-Hsin Liu, Wei-Jhen Huang, Ya-Chi Chen. OBI Pharma, Inc., Taipei, TaiwanSession Title: PO.CL.0705 - Targeted Antigen Therapies and ImmunityLocation: Poster Section 49Poster Board Number: 17Abstract Presentation Number: 2665Title: Guide-effector bsADCs: Driving co-endocytosis for enhanced payload delivery6Authors: Wei-Jhen Huang, Woan Eng Chan, Meng-Hsin Liu, Yueh Chin Wu, Ya-Chi Chen .OBI Pharma, Inc., Taipei, TaiwanSession Title: PO.ET02.02 - Antibody-Drug Conjugates and Linker Engineering 2Location: Poster Section 13Poster Board Number : 27Abstract Presentation Number: 1730Title: Hydrophilicity-Enhanced Linker Technology Enables Site-Specific Degrader-Antibody Conjugates with Improved Stability and Enhanced Activity7Authors: Yu-Hung Chen, Wei-Chien Tang, Chi-Dian Lu, Hung-Yi Lin, Wei-Jhen Huang, Nan-Hsuan Wang, Ya-Chi Chen, Teng-Yi Huang. OBI Pharma, Inc., Taipei, TaiwanSession Title: PO.ET02.02 - Antibody-Drug Conjugates and Linker Engineering 2Location: Poster Section 13Poster Board Number: 28Abstract Presentation Number: 1731Title: Cell-based payload release highlights design, site, and cell-dependent ratio shifts in dual-payload ADCs8Authors: Nan-Hsuan Wang, Wei-Han Lee, Evelyn He, Li Chuan Huang, Yu-Chao Huang, David Teng-Yi Huang, Ya-Chi Chen. OBI Pharma, Inc, Taipei, TaiwanSession Title: PO.CH01.06 - Antibodies, Antibody-Drug Conjugates, and Nucleic AcidsLocation: Poster Section 38Poster Board Number: 5Abstract Presentation Number: 2397Monday, April 20, 2026 (2:00 PM - 5:00 PM)Title:TROP2 Upregulation and Interaction with HER2 Mediate Trastuzumab Resistance4Authors: Yuan-Liang Wang, Chi-Huan Lu, Cheng-Yen Wei, Jye-Yu Huang, Woan-Eng Chan, Lu-Tzu Chen, Ya-Chi Chen. OBI Pharma, Inc., Taipei, TaiwanSession Title: PO.ET03.06 Drug Resistance 1: Antibodies and ADCsLocation: Poster Section 12Poster Board Number: 18Abstract Presentation Number: 2972Tuesday, April 21, 2026 (9:00 AM - 12:00 PM)Title: Glycan-based site specific ADC Achieves Sustained Tumor Control through Improved Payload Delivery and Immune Activation9Authors: Liu Chih-Chun, Tsai Yi-Chien, Huang Jing-Rong, Lo Fei-Yun, Pei Yu, Hsu Ren-Yu, Tu Tzu-Hsuan, Chen Ya-Chi. OBI Pharma, Inc, Taipei, TaiwanSession Title: PO.IM02.04 - Adaptive Immunity in CancerLocation: Poster Section 6Poster Board Number: 2Abstract Presentation Number: 4234Title: Advancing ADC therapeutics with next-generation site-specific glycan conjugation and dual-payload flexibility10Authors: Wei-Chien Tang, Yu-Hung Chen, Chih-Kang Chang, Ting-Wei Liu, Hung-Yi Lin, Wei-Jhen Huang, Chi-Huan Lu, Ren-Yu Hsu, Nan-Hsuan Wang, Ya-Chi Chen,Teng-Yi Huang. OBI Pharma, Inc, Taipei, TaiwanSession Title: PO.ET02.03 - Antibody-Drug Conjugates and Linker Engineering 3Location: Poster Section 12Poster Board Number: 1Abstract Presentation Number: 4423The e-posters will be available for browsing at the AACR virtual meeting platform beginning at 12:00 PM PT on April 17, as well as on the OBI Pharma website (www.obipharma.com) beginning on April 18.1 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/45832 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/53853 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/45884 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/50305 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/40516 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/54007 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/54018 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/64749 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/131110 AACR Annual Meeting 2026 Abstracts online https://www.abstractsonline.com/pp8/#!/21436/presentation/5403About OBI PharmaOBI Pharma is a clinical-stage global oncology company established in 2002 and headquartered in Taiwan. Together with its subsidiary OBI Pharma USA, Inc., the company is dedicated to developing innovative cancer therapeutics to provide new treatment options for patients with urgent medical needs.OBI's research efforts center on novel antibody-drug conjugates (ADC). Through its patented next-generation conjugation technology platform, Obrion™, OBI has established diverse ADC design modalities. The platform integrates proprietary conjugation and linker technologies, including GlycOBI®, GlycOBI DUO®, EndoSymeOBI®, HYPrOBI®, and the novel irreversible cysteine-conjugation technology ThiOBI® , to advance next-generation ADC solutions. OBI has developed a next-generation suite of ADC programs. These include monospecific ADCs such as OBI-902 (TROP2), which is under Ph1 clinical evaluation, and OBI-904 (Nectin-4); a bispecific single-payload ADC, OBI-201 (HER2 x TROP2); and a bispecific dual-payload ADC, OBI-221 (cMET x HER3). To broaden the applicability of the HYPrOBI® linker technology, OBI has further developed the ThiOBI® technology to enable irreversible cysteine-based conjugation. In addition to its ADC programs, OBI's assets include OBI-3424, a first-in-class AKR1C3-targeted small-molecule prodrug that selectively releases a potent DNA-alkylating agent in the presence of the aldo-keto reductase 1C3 enzyme, which is highly expressed in certain tumors. Additional information can be found at www.obipharma.com.About OBI-902 and OBI-992OBI-902 is a TROP2-targeted antibody-drug conjugate (ADC) that carries a potent topoisomerase I inhibitor payload to kill tumor cells with a drug-antibody ratio (DAR) of 4. TROP2 is highly expressed in a variety of solid tumors such as breast, lung, biliary, bile duct (cholangiocarcinoma), ovarian, gastric, and many other cancer types, rendering it an ideal target for cancer therapy.OBI-902 is a novel site-specific glycan-conjugated ADC using OBI's proprietary GlycOBI® platform, which provides improved stability and enhanced hydrophilicity. OBI-902 demonstrated remarkable antitumor efficacy across multiple tumors, including NSCLC, triple-negative breast cancer (TNBC), and gastric cancer, improved pharmacokinetic characteristics, and a favorable safety profile in various animal models. The IND of OBI-902 was cleared by the United States Food and Drug Administration (US FDA) on April 30, 2025, received Orphan Drug Designation (ODD) from the US FDA for cholangiocarcinoma on Nov. 16, 2025, and gastric cancer (GC), including gastroesophageal junction cancer (GEJC) on December 5, 2025.The Phase 1/2 Study (NCT07124117) is ongoing, with completion of the Phase 1a portion targeted for 1H 2027.OBI-992 is a TROP2-targeted antibody-drug conjugate (ADC) that carries a potent topoisomerase I inhibitor payload with drug-to-antibody ratio of 4 (DAR 4) via a cysteine conjugated, hydrophilic and enzyme-cleavable linker. OBI-992 remains stable in circulation and delivers this cytotoxic payload to TROP2-expressing tumor cells, leading to tumor cell death while avoiding off-target toxicities.The US FDA cleared the IND application for OBI-992 in Jan 2024 and subsequently granted Orphan Drug Designation for the treatment of gastric cancer, including GEJC in Aug 2024. The Phase 1/2 Study (NCT06480240) has reached the putative Recommended Phase 2 Dose (pRP2D) and Phase I completion is targeted for 1H 2027.Since December 2021, OBI has been granted by Biosion, Inc. (www.biosion.com) an exclusive license to a TROP2 targeting antibody amino acid sequence in all jurisdictions except Mainland China, Hong Kong and Macau. Biosion holds exclusive rights to that antibody sequence in Mainland China, Hong Kong and Macau. OBI holds commercial rights to OBI-992 and OBI-902 in all jurisdictions except Mainland China, Hong Kong and Macau, while Biosion holds commercial rights to OBI-992 and OBI-902 in Mainland China, Hong Kong and Macau.About OBI-904OBI-904 is an antibody-drug conjugate (ADC) comprised of a monoclonal antibody specifically targeting Nectin-4 (Nectin cell adhesion molecule 4), linked to a potent topoisomerase I inhibitor payload with Drug-to-Antibody Ratio of 8 (DAR8) through OBI's proprietary GlycOBI® ADC enabling technologies, powered by a dual-function enzyme, EndoSymeOBI®, and a novel linker, HYPrOBI®. It is a potentially first-in-class and best-in-class glycan-based ADC designed to target multiple cancer types that express Nectin-4. Antitumor activity has been shown across several animal disease models, including HNSCC, CRC, TNBC, cervical and sarcoma cancers; OBI-904 has demonstrated a favorable safety profile in a repeat dose toxicity study in monkeys, and is now in the pre-IND stage of development.About OBI-201OBI-201 is a TROP2 x HER2 bispecific ADC generated by OBI GlycOBI® ADC enabling technologies conjugated with a topoisomerase I inhibitor. Notably, OBI is the first to demonstrate that HER2 and TROP2 can interact and form a protein complex on the cell surface-a groundbreaking discovery facilitated through collaboration with a specialized AI drug discovery partner. OBI-201 offers several advantages over mono-specific TROP2 or HER2 ADCs. By targeting both antigens, it broadens tumor coverage, especially in cancers with heterogeneous or low expression of either target. Dual targeting can enhance tumor selectivity, binding avidity, and internalization, improving payload delivery to cancer cells while potentially reducing toxicity to normal cells. OBI-201 may overcome resistance associated with downregulation of targets after treatment by certain monospecific ADCs.Animal studies revealed that OBI-201 demonstrated significantly superior anti-tumor activity compared to single-target ADCs in drug-resistant breast cancer models with extremely low HER2 expression. OBI-201 was able to sustain tumor growth suppression, indicating its potential to overcome multiple drug-resistance mechanisms. OBI-201 is a next-generation bispecific ADC poised to break through the limitations of single-target ADCs, potentially offering patients a more comprehensive and durable treatment option.About OBI-221OBI-221 is a Bispecific-Dual Payload ADC (BsDpADC), generated by OBI GlycOBI DUO® technologies, targeting cMET and HER3, conjugated with dual payload of MMAE and topoisomerase I inhibitor.In clinical practice, EGFR-targeted therapies have become a key strategy for treating non-small cell lung cancer (NSCLC) and colorectal cancer (CRC) patients. However, tumors often rapidly develop resistance by upregulating cMET and HER3 that, in turn, sustain tumor growth. Moreover, high expressions of cMET and HER3 have been observed in gastric cancer, head and neck cancer, and various other solid tumors, further underscoring the unmet medical needs.To address this challenge, OBI Pharma leverages its proprietary GlycOBI DUO® platform and HYPrOBI® linker to develop a novel bispecific dual-payload antibody-drug conjugate (BsDpADC)-OBI-221. This therapeutic agent simultaneously targets cMET and HER3 while delivering synergistic cytotoxic agents, effectively combating tumor resistance and heterogeneity. This breakthrough design not only addresses an unmet medical need but also represents a forward-looking strategy for next-generation ADC development.OBI-221 holds meaningful potential to overcome resistance to existing EGFR-targeted therapies, potentially offering patients more targeted treatment options while delivering substantial clinical value.About GlycOBI®OBI has developed a unique glycan-based, site-specific ADC technology (GlycOBI®), designed in a Plug and Play format that is compatible with any antibodies, linkers, and payloads, and supports various drug-antibody ratios (DAR)(up to 16). Powered by OBI's proprietary dual-function enzymatic technology EndoSymeOBI® and its hydrophilic linker technology HYPrOBI®, GlycOBI®, a core component of OBI's Obrion™ ADC technology family, enables the generation of site-specific and homogeneous ADCs through an efficient, scalable and streamlined two-step, one-pot conjugation process under GMP conditions.During the conjugation process, GlycOBI® avoids disrupting the antibody structure and ensures that the resulting ADC retains biophysical characteristics comparable to the native antibody. In addition, OBI's linker technology improves payload conjugation efficiency and reduces the propensity for aggregation or degradation, further supporting a stable and well-controlled ADC manufacturing process. GlycOBI® has overcome limitations commonly associated with traditional ADC approaches and has demonstrated improved antitumor activity and stability in various in vivo studies. Notably, the platform supports the conjugation of both cytotoxic small-molecule inhibitors and highly hydrophobic degraders, expanding its applicability to next-generation modalities such as DACs.About GlycOBI DUO®GlycOBI DUO® is a next-generation dual-payload antibody-drug conjugate (ADC) technology built on the GlycOBI® site-specific conjugation platform and its proprietary enzymatic conjugation strategy. It enables the precise and programmable attachment of two distinct payloads to a single antibody with tunable ratios and supports high DAR ratios, including up to DAR24. By combining complementary mechanisms of action, GlycOBI DUO® is designed to enhance antitumor efficacy, address tumor heterogeneity, and improve the overall therapeutic index, with the potential to overcome resistance mechanisms associated with conventional ADCs-representing a promising advancement in next-generation ADC development.About ThiOBI®OBI has developed a novel irreversible, cysteine conjugation ADC platform (ThiOBI®) with improved stability, which can apply to any antibodies, linkers, and payloads. OBI's proprietary ThiOBI® platform including linker technologies (HYPrOBI®) can generate ADCs in different biomolecular formats, including antibody fragments, nanobodies, peptides, and proteins. Furthermore, OBI's HYPrOBI® linker technology has improved conjugation efficiency of the payload and reduced aggregation propensity and also expanded the half-life of the ADC products. ThiOBI has overcome the limitations of traditional cysteine ADCs and achieved better antitumor activity and stability in various in vivo tests.GlycOBI®, EndoSymeOBI®, ThiOBI®, HYPrOBI®, and GlycOBI DUO® are registered trademarks of OBI. Obrion™ is a trademark under registration.Forward-Looking StatementsStatements included in this press release that are not a description of historical facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements include, but are not limited to, statements about future clinical trials, results and the timing of such trials and results. Such risk factors are identified and discussed from time to time in OBI Pharma's reports and presentations, including OBI Pharma's filings with the Taiwan Securities and Futures Bureau.COMPANY CONTACT:Jukka MuhonenExecutive Director, Business DevelopmentOBI Pharma USA, Inc.1.617.821.0292jukkamuhonen@obipharma.comSOURCE: OBI Pharma USA, Inc. Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com